BRASS BLANKING CAP
BRASS BLANKING CAP
Brass blanking cap, threaded brass fitting used to close an opening of a pipefitting or tube normally used for inspection and cleanout. The brass blanking cap (figure 300) is brass threaded part that used to close the end of a dead end pipe or the opening of a tube or accessory for inspection and cleaning. The piece consists of a part with hexagonal shape for tightening and a female thread. Product range with female thread dimensions from 1/8" to 2", with chrome surface finish on some references and with locking hole variants also available.
|
|
|
|
|
|
|---|---|---|---|---|---|
| 451950 | 1/8" | 0.0035 | 25 | 5000 | 8435084005771 |
| 452000 | 1/4" | 0.0075 | 25 | 2500 | 8435084005788 |
| 452100 | 3/8" | 0.0127 | 25 | 1500 | 8435084005795 |
| 452200 | 1/2" | 0.0202 | 25 | 800 | 8435084005849 |
| 452300 | 3/4" | 0.0323 | 25 | 550 | 8435084005870 |
| 452400 | 1" | 0.0570 | 10 | 300 | 8435084005900 |
| 452500 | 1.1/4" | 0.0870 | 200 | 8435084005924 | |
| 452600 | 1.1/2" | 0.1370 | 150 | 8435084005948 | |
| 452700 | 2" | 0.2380 | 100 | 8435084005962 | |
| CHROMED | |||||
| 452102 | 3/8" | 0.0132 | 1500 | 8435084005801 | |
| 452202 | 1/2" | 0.0205 | 25 | 1000 | 8435084005856 |
| 452302 | 3/4" | 0.0323 | 600 | 8435084005887 | |
| 452410 | 1" | 0.0570 | 300 | 8435084021863 | |
| WITH LOCKING HOLE (*) | |||||
| 452203 | 1/2" | 0.0227 | 25 | 800 | 8435084005863 |
| 452303 | 3/4" | 0.0346 | 25 | 600 | 8435084005894 |
| 452403 | 1" | 0.0530 | 10 | 300 | 8435084005917 |
| 452503 | 1.1/4" | 0.1600 | 200 | 8435084005931 | |
| 452601 | 1.1/2" | 0.1590 | 150 | 8435084005955 | |
BRASS FLANGED PLUG
SECURITY PLUG
BRASS PLUG WITH LOCKING HOLE
BRASS BLANKING CAP WITH LOCKING HOLE
WALL PLATE STAINLESS STEEL WITH CHROMED PLUG
WALL PLATE STAINLESS STEEL WITH PLUG AND SCREW
FLANGED PLUG FOR PEX
