ELBOW COUPLER FITTING FOR MULTILAYER
ELBOW COUPLER FITTING FOR MULTILAYER
Brass compression fitting for multilayer pipes (pex-Al-pex), with a direction change of the pipe run at right angle (90º). It is composed by five pieces: a body ended on a female thread and elbow shape, one insert with its corresponding sealing O-rings, a clamping ring, a teflon joint and a nickeled nut. The insert is introduced within the body and the pipe within the insert, so the whole group is fixed when tightening the nickeled nut around the clamp ring. It is a connector of polyethylene pipes. Product range with thread female dimension of 1/2” and pipe diameter from 16 mm to 20 mm, with pipe thickness of 2,0 mm.
|
|
|
|
|
|
|---|---|---|---|---|---|
| NI950116 | 16 x 2,0 | 0.1280 | 10 | 140 | 8435084070113 |
| NI950118 | 18 x 2,0 | 0.1610 | 5 | 110 | 8435084070120 |
| NI950120 | 20 x 2,0 | 0.2100 | 5 | 90 | 8435084070137 |
FEMALE ELBOW FITTING FOR MULTILAYER
WALL PLATE FEMALE ELBOW FITTING FOR MULTILAYER
ELBOW 100º FITTING FOR MULTILAYER
STRAIGHT MALE COUPLER FITTING FOR MULTILAYER
STRAIGHT FEMALE COUPLER FITTING FOR MULTILAYER
STRAIGHT COUPLER FITTING FOR MULTILAYER
EQUAL TEE COUPLER FITTING FOR MULTILAYER
FEMALE TEE FITTING FOR MULTILAYER
END PIECE FOR MANIFOLD FITTING FOR MULTILAYER
FLANGED PLUG FOR MULTILAYER
STOPCOCK FOR MULTILAYER
