Male Elbow · Compression Brass Fittings for Copper Tube

MALE ELBOW COMPRESSION FITTING FOR COPPER

This is a compression fitting for quick connection of copper pipe to threaded fitting. Male elbow compression fitting, made in brass, is composed by three parts: a body elbow shaped with one side male threaded, one olive and one nut. After cutting the pipe with a pipe cutter, nut and olive are introduced on the pipe, and finally the body up to the base of the pipe, then nut must be turned with the adjustable wrench at the end, to help to give consistency and make a hermetic tightening. Product range’s dimensions go from 3/8" until 1" and pipe diameter 12 mm to 28 mm.

REF: 310.11
Categories: Compression Fittings for Copper Tube, Plumbing

References
Downloads


2000701	3/8" x 12	0.0450	5	8435084021238
2000702	1/2" x 12	0.0640	5	8435084021245
2000703	1/2" x 14	0.0720	5	8435084021252
2000704	1/2" x 15	0.0720	5	8435084021269
2000705	1/2" x 16	0.1130	5	8435084021276
2000706	1/2" x 18	0.0950	5	8435084021283
2000707	3/4" x 12		5	8435084021290
2000708	3/4" x 14		5	8435084021306
2000709	3/4" x 15	0.1110	5	8435084021313
2000710	3/4" x 16		5	8435084021320
2000711	3/4" x 18	0.1200	5	8435084021337
2000712	3/4" x 22	0.1320	5	8435084021344
2000713	3/4" x 28	0.1710	5	8435084021351
2000714	1" x 22	0.1810	5	8435084021368
2000715	1" x 28	0.2060	5	8435084021375