PLUG COMPRESSION FOR COPPER
PLUG COMPRESSION FOR COPPER
This is a compression fitting for quick connection of copper pipes. Plug compression fitting, made in brass, is composed by three parts: a body (threaded piece), one olive and one nut. After cutting the pipe with a pipe cutter, nut and olive are introduced on the pipe, and finally the threaded piece up to the base of the pipe, then nut must be turned with the adjustable wrench at the end, to help to give consistency and make a hermetic tightening. Product range’s dimensions go from diameter 12 mm to 35 mm.
|
|
|
|
|
|---|---|---|---|---|
| 2001600 | Ø 12 | 0.0310 | 10 | 8435084021726 |
| 2001601 | Ø 15 | 0.0520 | 10 | 8435084021733 |
| 2001602 | Ø 22 | 0.1180 | 5 | 8435084021740 |
| 2001603 | Ø 28 | 0.1680 | 5 | 8435084021757 |
| 2001604 | Ø 35 | 0.2400 | 8435084021764 |
STRAIGHT REDUCED COUPLER COMPRESSION FITTING FOR COPPER
STRAIGHT FEMALE COUPLER COMPRESSION FITTING FOR COPPER
STRAIGHT MALE COUPLER COMPRESSION FITTING FOR COPPER
CORNER TEE COMPRESSION FITTING FOR COPPER
EQUAL TEE COMPRESSION FITTING FOR COPPER
FEMALE TEE COMPRESSION FITTING FOR COPPER
REDUCED COUPLER TEE COMPRESSION FITTING FOR COPPER
MALE TEE COMPRESSION FITTING FOR COPPER
EQUAL COUPLER ELBOW COMPRESSION FITTING FOR COPPER
MALE ELBOW COMPRESSION FITTING FOR COPPER
FEMALE ELBOW COMPRESSION FITTING FOR COPPER
FEMALE WALL PLATE ELBOW COMPRESSION FITTING FOR COPPER
REDUCED COUPLER ELBOW COMPRESSION FITTING FOR COPPER
COUPLER CROSS COMPRESSION FITTING FOR COPPER
MALE STRAIGHT COUPLER FOR RADIATOR COMPRESSION FITTING FOR COPPER
