Straight Coupler · Compression Brass Fittings for Copper Tube

STRAIGHT COUPLER COMPRESSION FITTING FOR COPPER

This is a compression fitting for quick connection of copper pipes. Straight coupler compression fitting, made in brass, is composed by five parts: a body (threaded piece), two olives and two nuts. After cutting the pipe with a pipe cutter, nut and olive are introduced on the pipe, and finally the threaded piece up to the base of the pipe, then nut must be turned with the adjustable wrench at the end, to help to give consistency and make a hermetic tightening. Product range’s dimensions go from diameter 10 mm to 54 mm.

REF: 310.01
Categories: Compression Fittings for Copper Tube, Plumbing

References
Downloads


2000110	Ø 10 x 10	0.0400	10	450	8435084020002
2000112	Ø 12 x 12	0.0490	10	350	8435084020019
2000114	Ø 14 x 14	0.0880	10		8435084020026
2000115	Ø 15 x 15	0.0880	10	200	8435084020033
2000116	Ø 16 x 16	0.1090	10		8435084020040
2000118	Ø 18 x 18	0.0970	10		8435084020057
2000122	Ø 22 x 22	0.1540	5		8435084020064
2000128	Ø 28 x 28	0.2220	5		8435084020071
2000135	Ø 35 x 35				8435084020088
2000142	Ø 42 x 42				8435084020095
2000154	Ø 54 x 54				8435084020101